Applicators

Substantial Efficiencies

MCU-Coatings reduce coating application times by up to 50%, are applied much thinner than most traditional  coatings, usually around 225µm DFT, even on C5 (marine and industrial) applications.

Applicators around the world have commented on our coatings excellent wetting out properties, coverage and their rare ability to cover sharp corners.

They are also surface tolerant and are not limited by weather restrictions like most traditional coatings. Inclement weather delays due to temperature extremes, rain and dew are somewhat irrelevant when it comes to moisture cured urethanes.

Other Features

• Single component, unlimited open times
• 2-coat system
• Apply in 6% – 99% humidity
• Apply in -15⁰C to 50⁰C (and on hot surfaces up to 90⁰C)
• Brush, spray or roll
• Excellent wetting out properties and good coverage
• High surface tolerance
• Can be recoated in 45 minutes if also using MCU-Quickcure
• Touch dry after 10 minutes
• Unaffected by moisture after 15 minutes
• Resists blistering
• Primer is not prone to cracking when DFT’s are over 50µm
• Immersible after 15 minutes (it continues to cure underwater)
• Open recoat intervals
• Retains their elasticity and do not embrittle over time
• Adhere tenaciously to existing coatings, so are ideal for maintenance, repairs and overcoating
• Are hugely versatile so you do not need to carry dozens of specialty coating

(There are a lot more reasons why MCU-Coatings are low risk and applicator friendly)

Nothing like leaving a lasting impression